#foldabots10: Aninotron Full Review

#foldabots #foldabots10 #TheFoldabotsBlog #Aninotron

Usually I've been doing reviews with the photos separate from the review itself, but this time, I will be including photos on this review, and probably by December with our next set of Foldabots (I assume there won't be anymore of them, until I got the July issue lately which I'll reveal in a few weeks.) especially the good guys are lacking new gestalts at this point.

On this review, we'll be taking a close look on #Aninotron in full.

Introduction

As we close the former half of this year, we look back at Nu-Sho's new titan and its individual components. This gestalt in particular has a bit of Elementron vibe in it, and it's the first time we get something new for this set like convertibles, a patrol bike, a hearse, and a private helicopter.

As an addition, I will be writing their bios, features, and specs to make the review more informative.

ANINO

[INT: 4 / 5] [END: 3 / 5] [STR: 4 / 5] [SPD: 4 / 5] [SSK: 3 / 5]

"Anino is an ambitious Lutabot who claims he's stronger than Nu-Sho. Together with the Aninobots, he wreaks havoc on the planet by using photon absorbents to suck in light leaving a place in total darkness. He forms the left arm right leg of the gigantic combiner Aninotron."

Anino's vehicle mode is a convertible

Anino's robot mode with his dagger

Released in January, this is the first of the series created by Ian Maypa. I definitely love the way they got up with a cockpit details for the first time since convertibles like this one doesn't need to be just a flat design like I did once with an experimental figure. My first impression when this guy was released, is the possible color scheme of the gestalt would be all blue like Nu-Sho, but we'll get to that later in the review.

Anino is equipped with a dagger made of condensed toxic particles, apart from the usual Lutant life source. As a convertible, Anino has photon collectors on its headlights, as a bonus, he gets a protective cape which also acts as his invisibility cloak for stealthy back stabs.

SIN-DAKK

[INT: 2 / 5] [END: 3 / 5] [STR: 4 / 5] [SPD: 4 / 5] [SSK: 3 / 5]

"Sin-Dakk is an Aninobot whose bad temper is as despicable as the stench of the toxic gas that he emits. He is all brawn and no brains. His stealthy and powerful air attacks make him one of the toughest Lutabots to beat. Sin-Dakk forms Aninotron's right arm."

Sin-Dakk's vehicle mode is a deadly private helicopter

Sin-Dakk's robot mode, with shuriken in hand.

Released in February, the second member of the team was made by Eduard Vergara. This isn't the first time we had an aircraft-based Lutabot. Sigwa, Delubyo, Amihanator, you name it. But the good thing about Sin-Dakk is that he's the first helicopter Lutabot. My first impression on this guy, is he's something of a ninja which is nice.

Sin-Dakk can use his tail propellers as a lethal boomerang or rather a deadly shuriken, while he can emit toxic fumes from his claws. As a helicopter, Sin-Dakk has rotor blades with probably diamond tips in it so he can cut through metal like a hot knife through butter. He can also hide in the shadows like Anino, and he can turn ordinary air pollutants to poison gas.

DILIM

[INT: 3 / 5] [END: 3 / 5] [STR: 3 / 5] [SPD: 4 / 5] [SSK: 2 / 5]

"Like a shadow, Dilim is a developed follower of Aninobot. This extremely loyal and protective 'bot is silent but deadly and willing to sacrifice his toxic life energy for the greater cause of the Aninobots. Dilim does not care about personal glory and fame; he is contented to being just a useful ally in order for his team to win a battle. He forms the right arm left leg of Aninotron."

Dilim's vehicle mode is the same as Anino's, except he has a roof on.

Dilim's robot mode

Released in March, comes the third piece of the gestalt created by John Louise Capillo. My first impression on this guy was when this was released, I had no idea why would we have two right arms in the first place, which is odd. This guy doesn't have much accessories than a detachable canopy part. And if you've been paying attention, Aninotron has an Elementron feel to it, and probably Dilim and Anino is the equivalent of Alon and Agos.

Dilim is equipped with the said roof part which also acts as his shield, and he can make toxic blasts by grabbing air pollution with his bare hands. As another converter car, he almost has the same features as Anino's such as light-stealing photon collectors, and he can also go into tight spots. Dilim Gets You Going!

KADENA

[INT: 4 / 5] [END: 2 / 5] [STR: 3 / 5] [SPD: 5 / 5] [SSK: 4 / 5]

"Kadena is and iron-fisted law enforcer who punishes anyone who stands in his way of the Aninobots. He has a hi-tech tracking device that helps him hunt down their enemies. Kadena is such a skilled tracker, the Foldabots are extra cautious whenever he's on patrol. Kadena forms Aninotron's left arm."

Kadena's vehicle mode is an HTP patrol motorcycle

Kadena's robot mode sans the heft load of accessories which he'll need later on

Released in April, this tenacious fourth part of Aninotron is made by Nicolo Morales. My first impression when I saw this guy is the possible incompatibility to the gestalt, which I've thought whether he's connected one way or the other. This guy I suppose will have a lot of stuff even though we didn't get them on the issue where he came from.

Kadena is the most versatile of the team, partly because he can make a chain mace using his handcuffs and the flasher post, while his shield is the bulletproof visor on the bike handle. As a HTP 'Pat-bike' he can keep the 'Lutagen' and his arsenal safe in storage pods, as they would call them, while the sirens can damage robot circuits. Imagine if he uses them, would he be affected by the sound?

KARO

[INT: 1 / 5] [END: 2 / 5] [STR: 5 / 5] [SPD: 2 / 5] [SSK: 2 / 5]

"Karo is one of Anino's loyal minions. He follows his master's commands without hesitation. Should anyone think of messing around with Karo, he uses his photon blasters to send them running. Inside his trunk is their team's precious cargo--Aninotron's head! He forms the main body of Aninotron."

Karo's vehicle mode is a black funeral car with right side headlights missing

Karo's robot mode is as simple as Dilim

Released in May, to celebrate the 10th anniversary of Foldabots, is the final component created by Frian Mark Del Valle. My first impression when he came out is he's rather huge for a hearse, and fatter than of Jeve Macabiog's OCs. On his own, he's very weak in vehicle mode especially the hood has no support either one way or the other, even with the tailgate added. But I do like the way they do with his legs in robot mode, very nice indeed.

Karo is very big in comparison to his comrades, which makes him the brawler, while he has a photon shooter on his left eye. As a hearse, despite the toy flaws, is the protective armor as tough as Tigastron, and like Dilim, he can shoot out toxic gas from his hands.

ANINOTRON

[INT: 4 / 5] [END: 3 / 5] [STR: 4 / 5] [SPD: 2 / 5] [SSK: 3 / 5]

"Aninotron is the ultimate form of all the Aninobots combined--Anino, Dilim, Karo, Sin-Dakk, and Kadena. The photon energy emanating from these Aninobots is the source of Aninotron's power. His logic circuits are strategically  located inside a storage pod on his head, which is surrounded by toxic flaming fumes."

Here are some of the stuff found on the pattern

And here are the other stuff included. Note Sin-Dakk's tail blades snug perfectly when placed on the tail

The head honcho with his mantle

Sin-Dakk with two shurikens

Kadena with the works

Released in June, the complementary parts of the mighty gestalt can be found here. This includes extra parts like Karo's tailgate, Anino's cape and canopy, and of course the gestalt head that still does no other purpose than being a head. You can also refer to the pictures for some good uses for that head like Karo's toxic gas ball.

Aninotron's Lutant splat is basically Karo's, point made. On the next few pictures I will show you how I mounted his photon cannon and how to utilize other parts like the shurikens on both hands and the spare visor to make the death claw more lethal. What I also did is to store the roof parts of Anino and Dilim inside the cockpit, secured with the windshield if you don't like hollowed parts.

The Aninobots with everything you see here including a toxic gas ball on Karo's arm

Them again, in their vehicle modes. Note Sin-Dakk has paperclips for support

On the next images before you are my techniques in building Aninotron.

Anino and Dilim: Tuck head and one arm inside while leaving the other arm and hood out

Sin-Dakk and Kadena: Place paperclips on the leg areas while forming the hands from the front parts of the two

Aninotron Complete! (I placed the shurikens on both hands, Kadena's shield on the unbent fender for better looking claws, and the shoulder cannon inserted on one tab on Karo.)

Size comparison with Transformers toys: Combiner Wars Protectobot Groove (Legends Class) on the right, and MP-29 Destron Laserwave (Decepticon Shockwave) on the left

Conclusion

Aninotron is just one of those gestalts whose design is rather clean and not messy if you followed the design like Zootron, which I don't like how it was built leading to design cons like Tindig's head is visible, and Gadya's arms were useless in comparison to my version which also includes Zootron holding Baluti.

Now I mentioned in the start of this blog, is the July K-Zone has a Foldabot (yay, good guys!) and the first part of a new gestalt (yay again!). (Unfortunately, K-Zone doesn't have Overwatch related stuff, at least on this month, since it's still relatively a new game and my brother's playing it. Or is it, kids find this game harder than Minecraft or other featured games on that issue. Please K-Zone PH, do an Overwatch issue in August!)

As for my upcoming new Foldabot Habol, he's good to go, and ready to be built soon along with my crossover design, which I will release soon. Until then, this has been The Foldabots Blog, we'll see you next month!